$ 108.00
Details
Both metering and splitter valves availableChemically compatible constructionShip complete with fittings Micro-Metering ValvesCan reduce outgoing flow to as low as 3.5μL per minuteNeedle valves are perfect for use with peristaltic pump fluid-transfer applications, mass spectrometry, and fraction collection Can also be used to regulate gas flow in helium sparging lines and as a flow-dependent variable back-pressure regulator Material: PEEK™, BlackO.D. tubing: 1/8 in.Thru-hole: 0.020 in. (0.50mm)Internal volume: 7.7μL (max., with valve fully open)Includes: (2) XP-330Flow rates as low as 3.5μL/min. (at 1mL/min. incoming flow rate w/ room-temperature water)1/4-28 flat-bottom port configurationFlow path materials are PEEK™ polymer and PTFEMicro-Splitter Valves: Medium PressureAccurately split and control a low-flow stream from a single incoming supplyBiocompatible medium pressure micro-splitter valves (05-700-383, -384) are perfect for LC-MS and other multi-detector systems, fraction collectors and post column reactionsIdeal placement of these valves is on effluent side of detector flow cell, at maximum pressure of 800 psi (55 bar)Choose between 1/4-28 and 10-32 threaded versionsMicro-Splitter Valves: High PressureDesigned to operate under pressures up to 4,000 psi (276 bar)Well suited for running two analytical devices in parallelStandard versions will connect 1/16 in. O.D. tubing to each of the three available portsStainless-steel needle is inside the valve† The maximum internal volumes listed in the chart are with the valve fully open.
