CELL MICRO 10MM0.7ML , Pack of 1.

Details

Here is the corrected text: Micro, Black Sides, Cat. No.: 414004-070 Cover type: Flat lid Sample volume: 0.7 ml Pathlength: 10 mm External dimensions: W×L×H 12.5×12.5×45 mm Internal dimensions: W×L 2×10 mm Manufactured from Spectrosil quartz for accurate readings over the entire UV range to near-infrared range. Due to the fully heat-fused construction (no intermediate materials or adhesives) and careful annealing to remove any strain, there is no optical or physical distortion of the two optically polished windows. In semi-micro cells, the walls parallel to the light path are thickened, decreasing the sample chamber width to 4mm. Sub-micro cells have a Z dimension that must be matched between the cell and the instrument to be used. Three cover types are available: flat lid, stopper, and screw cap. Flat lids and stoppers are made of polytetrafluoroethylene (PTFE). Stoppered cells feature a block fused to the top of the cell with a ground hole for the stopper, providing a more suitable seal for volatile liquids. Cells with screw caps can be used under anaerobic conditions and offer an air-tight fit. Cell 414004-054 features a closed-top polymer screw cap with a silicone rubber gasket. Cell 414004-055 features an open-top polymer screw cap with a silicone rubber septum. Note: Not recommended for use with ultrasonic cleaning. Far UV quartz | Wavelength range of 170–2700 nm | Matched sets available | Fully heat-fused construction For Spectrosil cells for use in fluorometers, see 414004-064 series. Packs of two cells are matched sets. Standard Rectangular, Cat. No.: 414004-065 Cover type: Stopper Sample volume: 3.5 ml Pathlength: 10 mm External dimensions: W×L×H 12.5×12.5×45 mm Internal dimensions: W×L 10×10 mm Manufactured from Spectrosil quartz for accurate readings over the entire UV range to near-infrared range. Due to the fully heat-fused construction (no intermediate materials or adhesives) and careful annealing to remove any strain, there is no optical or physical distortion of the two optically polished windows. In semi-micro cells, the walls parallel to the light path are thickened, decreasing the sample chamber width to 4mm. Sub-micro cells have a Z dimension that must be matched between the cell and the instrument to be used. Three cover types are available: flat lid, stopper, and screw cap. Flat lids and stoppers are made of polytetrafluoroethylene (PTFE). Stoppered cells feature a block fused to the top of the cell with a ground hole for the stopper, providing a more suitable seal for volatile liquids. Cells with screw caps can be used under anaerobic conditions and offer an air-tight fit. Cell 414004-054 features a closed-top polymer screw cap with a silicone rubber gasket. Cell 414004-055 features an open-top polymer screw cap with a silicone rubber septum. Note: Not recommended for use with ultrasonic cleaning. Far UV quartz | Wavelength range of 170–2700 nm | Matched sets available | Fully heat-fused construction For Spectrosil cells for use in fluorometers, see 414004-064 series. Packs of two cells are matched sets. ... (and so on for the rest of the text)